Econolite

From HighwayWiki
Revision as of 05:13, 23 September 2015 by Blue245Ti (talk | contribs) ('Short-Groove' (8", Aluminum): More information added.)
Jump to: navigation, search

This page is a work in progress!

Econolite-Logo.png

Contents

Econolite Corporation

Products

Vehicle Signals


Econo-light Stop Sign Beacon

Econolite Econo-Light Stop Sign Beacon.png
Econolite Econo-Light Stop Sign Beacon 2.jpg



'Long-Groove' (8", Aluminum)

Extremely rare Econolite 12-8-8-8-8 doghouse with Long-Groove bottom sections and a Square-Door Bullseye red section
Closeup of the long grooves
3 Econolite Long-Groove sections in the top of a 5-section signal
3 Econolite Long-Groove sections in the top of a 5-section signal

Modelled after GE's final 8" signal design, the Econolite Long-Groove is very similar, with a few changes. It features 3 grooves along the back, as opposed to GE's two, and it sports the Econolite logo where the all too famous GE logo once stood. It was discontinued in favor of the Short-Groove due to moisture problems.


'Bullseye' Roundbody (12", Aluminum)

Econolite Bullseye 3-section signal
Econolite Bullseye Doghouse with a square-door red section
Square-door Econolite Bulls-eye traffic lights in Huntsville, AL.
Econolite Bullseye school beacon (right)

After Econolite bought GE's traffic signal line, Econolite began producing the traffic light known as the "Bullseye" traffic light in 1957. The "Bullseye" head gets its name from the bullseye appearance of the round body on the back. Square door variants have an older-style Econolite stamping inside the door and a part number E-652, whereas the round door variants have an E-752 part number on their doors. Sometime in the late 1970s, Econolite dropped the corporation from the logo on the back. This was originally thought to be post-1980, but, there are some heads on the street that are the early Econolite green, without washers underneath the latches, and with the newer logo. So, the change may've been phased in over time.


8"-to-12" Enlarger



'Shortgroove' (8", Aluminum)

Econosgbackpyth.jpg
Econolite Short Groove Ped Diagram.png
Econosgfrontpyth.jpg

The Shortgroove is named after the grooves on the back of the signal that stop before reaching the housing ends. Pedestrian signals were also crafted using the same housings. The traffic signals shipped with Kopp TL-4655 lenses that have the Econolite logo stamped on them (called the TL-4655-E). After 1961, the 'Corporation' part of the logo was deleted after Econolite was taken over by Tamar Electronics in 1962.


'Buttonback' (8" & 12", Aluminum)

Econolite Buttonback.png
Econolite Buttonback 4-section.png
Econolite Buttonback 2.png
Econolite Buttonback Signals.png



'Bubbleback' (8" & 12", Polycarbonate)

Econolite Bubbleback Signal 2.png
Econolite Bubbleback Signal 1.png
Econolite Bubbleback Close-up.png
Econolite Bubbleback Close-up Front.png



'Kentron-style' (8" & 12", Polycarbonate)



'Poly Buttonback' (8" & 12", Polycarbonate

Econobuttonbackspyth.jpg



'McCain-style' (12", Aluminum)

12" Front & Back
Abandoned beacon
12" and the rare 8" fronts
Abandoned beacon
8" back and side.

The newest Econolite signals on the market, this style features streamline door latches, a simple backing similar to McCain's, doors that can be reversed to open either right or left, and the newest Econolite logo imprinted vertically on the back of each housing. Like most modern signals, these are available in all standard colors, visor types, and configurations.


Pedestrian Signals


9 inch and 12 inch


'Long-Groove' (9" Square Lens)



'Long-Groove' (8" Round Lens)



'Short-Groove' (9" Square Lens)

Econolite Short-Groove Pedestrian Signal Diagram.png
Econosgpedbackpyth.jpg
Econosgpedfrontpyth.jpg



'Short-Groove' (8" Round Lens)



'Bullseye'-era Square-body (12" Square Lens)

12 inch Square Bullseye-era Pedestrian Signal.png
12 inch Square Bullseye-era Pedestrian Signal Diagram.png



'Bullseye' Roundbody (12" Round Lens)



'Buttonback' (Square Lens – 9" & 12")

Econolite Buttonback Pedestrian Signal.png
Econolite Buttonback Pedestrian Signal 2.png
Econolite Bubbleback Signal 3.png



'Bubbleback' (Square Lens – 9" & 12")



'Kentron-style' (Square Lens - 9" & 12")

Econolite Kentron-Style Ped side.JPG
Econolite Kentron-Style Ped.JPG



'Poly Buttonback' (Square Lens - 9" & 12")



'McCain-style' (Square Lens – 12")



16 inch


E8



'Buttonback'-era



'McCain-style'-era

16 inch Econolite pedestrian signal back.
16 inch Econolite pedestrian signal front.



Pedestrian Pushuttons


3" Pushbutton

Pushbutton with flat plate on bottom
Pushbutton Front cataog image.
Pushbutton with flat plate on top
Pushbutton Back catalog image.
There are two designs shown here. The 1st (top) has connections through the flat plate on the bottom. The 2nd (bottom 2) have connections through the back.
Pushbutton Interior catalog image.



3" Pushbutton w/ 5x7¾" Sign Base

Econolite 3 inch button with 5x7.25 inch sign base.png
5x7.25" signs that were available with these buttons.
9x12" signs that could attach in the place a 5x7.25" sign.



Full Pushbutton w/ Indicator Lights & 5x7¾" Sign

Econolite large button with lights and 5x7.25 inch sign.png
Signs that were available with these buttons



Full Pushbutton w/ 9x12" Sign

Econolite large button and 9x12 inch sign.png
Signs that were available with these buttons



Full Pushbutton w/ Indicator Lights & 9x12" Sign

Econolite large button with lights and 9x12 inch sign.png
Signs that were available with these buttons



9x12" Bracket-mount Sign

Econolite 9x12 inch bracket signs.png



Signal Mounting


Plumbizers

Econolite Buttonback signal with elevator plumbizers



Traffic Signal Brackets



Pedestrian Signal Brackets



Signal Lenses, Visors, & Backplates


Lenses



Visors



Backplates



Controllers


...